Job Description

• Responsible for the safe operation, maintenance, testing and fault finding of electronic systems, controls and equipment in respect of the BOP MUX systems on board. 
• Responsible for the installation, testing, commissioning and acceptance of new, refurbished or upgraded BOP MUX equipment on board vessel. 
• Assist with the correct assembly, operation, maintenance, testing and disconnection of the subsea blowout preventer, marine riser and related equipment.
• Ensure all subsea BOP MUX equipment conforms to vessel’s class and applicable API requirements
• Be fully conversant with Level 2 procedures and ensure that Level 5 (RSWMs) are fully updated with current work practices and are in accordance with SMS.
• Ensure any software changes are carried out in accordance with Stena software control procedures.
• Ensure all modifications, breakdowns, scheduled and unscheduled maintenance of subsea MUX equipment are carried out in a timely manner and entered into the TAG system. 
• Ensure all equipment modification work is carried out in accordance with Stena management of change procedures
• Ensure TAG system equipment details and maintenance procedures are relevant and up to date.
• Ensure that BOP MUX control system failures are properly investigated, root causes identified and relevant follow up / remedial actions are taken. 
• Ensure the installation has adequate supplies for the maintenance of subsea BOP MUX equipment. 
• Inform Senior Subsea Engineer of all matters affecting BOP MUX system reliability / availability. 
• Ensure good housekeeping in area of responsibility. 
• Participate in Pre-Job Safety Meetings incorporating the relevant Risk Assessment for the specific task. Pay particular attention to hand and body placement for all operations involving close proximity to heavy equipment.
• Compile daily on site progress reports and submit to Senior Subsea Engineer and Aberdeen Office.
• Complete a documented end-of-tour handover in line with Stena Drilling’s Handover / Reporting Procedure. 

Health, Safety & Environment

• Work according to and promote Stena Drilling’s HS&E Policies and Procedures as well as fully commit to preventing any damage to the environment. 
• Responsible and accountable to conduct their tasks in full compliance with Stena Drilling Limited procedures. 
• Comply with Stena Drilling procedures for management of risk and Safe Behaviour Programme; ensuring that a suitable and sufficient risk assessment is carried out for all work activities. 
• Participate in the STOP system, complete and submit cards after discussions. Monitor and coach crew members to participate in STOP and carry out STOP audits.
• Promote Stena Drilling’s “Golden Rules” and the rig’s “House Rules” during team discussions. 
• Attend and participate in Tool Box Talks and After Action Reviews. 
• Ensure work site is safe and that all tools used are in a satisfactory condition. 
• Ensure that storage, handling and use of chemicals are done in accordance with procedures. 
• Ensure equipment is secured to prevent movement due to wind or rig motion. 
• Ensure familiar with correct use, type and location of all Oil Spill Equipment.
• Comply with Stena Drilling’s waste segregation policy. 

Required Skills or Experience

• Industry recognised engineering qualifications
• IWCF Well Control Certificate
• Previous experience working on Cameron BOP MUX control systems.
• Previous experience as an Electronics Technician working on subsea electronics in an offshore environment – e.g. ROV or BOP MUX systems.
• 15 years' relative previous experience 
• Previous relative experience on a similar unit 
• IWCF Well Control Driller Level 3 Certificate 
• Seafarer Book
• Proficiency in Security Awareness
• Proficiency in Security Duties
• OPITO BOSIET/FOET
• Hose Termination/Assembly
• High Pressure Testing
• Rigging & Lifting/LOLER Supervisor
• TAG
• Driller Rising Analysis
• Banksman Slinger
• Abrasive Wheels
• HP Washdown
• Mobile Elevated Work Platform/Cherry Picker 
• Height – Work at Height and Harness Equipment User – Unit 2
• Height – Rescue – Use of Rescue Equip – Unit 3
• Ability to read technical drawings 
• Extensive knowledge, Maintenance and operation Solenoids, actuators, transducers & sensors as utilised in the subsea electronic control systems.  
• Extensive knowledge, Maintenance and operation equipment utilised for power distribution including transformers, UPS & Batteries.
• Extensive knowledge, Maintenance and operation Subsea Umbilical cables.
• Acoustic Control Systems.  
• Extensive knowledge, Maintenance and operation Signalling/signal processing equipment & techniques. 
• Extensive knowledge, Maintenance and operation Subsea electrical cables and connectors.
• Delivery execution of subsea electronics projects and upgrades.
• Extensive knowledge, Maintenance and operation Siemens Step 7 PLC’s, CAN Bus Networks, Wonderware HMI software as utilised in BOP surface electronics package.